10.4
Configuring SNMP
Querx can be integrated into network management
systems such as Nagios, OpenNMS or Zabbix via the
Simple Network Management Protocol (SNMP). egnite
Querx supports SNMPv1.
The Management Information Database (MIB) is saved
on the device and can be downloaded from the web
interface, as described in section
Practical examples of the application of SNMP can be
found on the product page at
10.4.1 General Data
Open the page
System / General
in the configuration
area to enter the data concerning the device’s system
name, contact person and location.
10.4.2 Activating SNMP
Open the page
Interfaces / SNMP
.
1.
Activate SNMP by clicking the checkbox
Enable
.
2.
Check the
Read community
and make any required
changes.
3.
Click
Save
at the bottom of the screen to apply your
changes.
Restart the device via the web interface as detailed in
chapter
i
Information
Please note that Querx needs to reboot after enabling
or deactivating the SNMP-agent.
89