2 First Use
2.1 Before First Use
The device should be left to acclimatize before setup, if its
temperature differs from the ambient climate.
In this case, wait for approximately two hours, before
connecting Querx to the power supply.
⚠
Attention
Temperature differences between the smart sensor and its
surroundings can lead to condensation, damaging the
device.
⚠
Information
Temperature differences between the smart sensor and its
surroundings can lead to measurement errors.
2.2 Mounting the Sensor
Querx sensors can be mounted using the latches on the
case. They can alternatively be mounted using zip-ties, for
instance tying them to piping
Please take note of the following points when mounting the
device:
Querx is designed for indoor use.
Do not mount Querx in locations that are directly exposed
to sunlight.
TH Models:
The device should be exposed to a sufficient
airflow. Measurements can be made in still air, but the
results for humidity will be falsified.
Do not mount Querx with the sensor cable pointing
upward. The cable should point downward or to either
side.
First Use
10
