5 Configuring Alerts
Querx can notify you of alerts via email, SNMP-trap and
Syslog whenever defined value limits are exceeded.
5.1 Basic Alert Configuration
Querx can notify you of the following critical ambient
conditions:
Temperature above upper limit value
Temperature below lower limit value
Temperature rising too quickly
Temperature falling too quickly
The
TH models
additionally support the following alerts:
Humidity above upper limit value
Humidity below lower limit value
Humidity rising too quickly
Humidity falling too quickly
Dew point above upper limit value
Dew point below lower limit value
⚠
Information
Alerts are only triggered when values rise above or fall
below the limit values. They are not triggered if the limit
values are merely reached.
5.1.1 Alerts and Dead-band
A dead-band value can be defined, in order to avoid the
repetition of alerts that are based on limit transgressions.
If the dead-band feature is activated, a value that has
triggered an alert will have to return towards its normal state
Configuring Alerts
36
