56V litHium-iOn COrDleSS BlOWer — lB4800
56V litHium-iOn COrDleSS BlOWer — lB4800
19
18
STaRTINg/STOppINg THE BLOWER (Fig. 6)
to start the blower, press down on the lock-off lever and hold it, then depress the
trigger. the blower will begin to run.
to stop the blower, release the trigger.
aDJUSTINg THE aIR VELOCITy (Fig. 6)
6
air Velocity adjusting Knob
Boost Button
lock-off lever
trigger
the blower is equipped with stepless speed regulation to control air speed.
to increase the air velocity, turn the air velocity adjusting knob clockwise when the
blower runs; to reduce the air velocity, turn the knob counterclockwise.
to enhance the air velocity, press the boost button to temporarily amplify the air speed
to the maximum.the blower will resume the previous speed when this button is
released.
OpERaTINg THE BLOWER
to keep from scattering debris, blow around the outer edges of a debris pile.
never blow directly into the center of a pile.
to reduce sound levels, limit the number of pieces of equipment used at any one
time.
use rakes and brooms to loosen debris before blowing. in dusty conditions,
slightly dampen surfaces when water is available.
Conserve water by using power blowers instead of hoses for many lawn and
garden applications, including areas such as gutters, screens, patios, grills,
porches, and gardens.
Watch out for children, pets, open windows, or freshly washed cars, and blow
debris safely away.
after using blowers or other equipment, clean up! Dispose of debris properly.
