◆
◆
◆
CAUTION IN INSTALLATION
Assemble the main body of the camera with lens quickly
at a clear place to avoid dust.
HD-SDI CONNECTION (STANDARD)
♣
Do not try to fix even if the camera does not work.
♣
Installation this camera at safety place where is no water.
If the camera has some problems with water accidently.
You have to contact A/S centre that sold the camera to you.
♣
The camera should be worked within a range of the
allowable temperature that refers to specification.
♣
If you would like to relocate the already installed product,
be sure to turn off the power and then move or reinstall it.
CONNECTION OF CAMERA
♣
Please contact the nearest A/S centre if you find out any
Problems. Please do not ignore any small problems they
can become a big problem.
♣
Please connect video output of a camera with video input of a
monitor or other devices. In case of connecting more than two
monitors, just set turning on 75 ohm switch of last monitor.
please choose a proper cable as following connected device
and distance.
♣
Be careful not to drop this camera and not to impact on it.
CCTV camera is a precision machine.
♣
Do not install the camera opposite of the sun so that it be
avoided direct light.
♣
Do not pull the cable. If you pull the cable, it will make
electrical problems such as disconnection.
The power adaptor must be more than DC12V 1A.
Do not turn on a power before you finish to connect the
camera with all devices.
