10
3
Intended use
eGym strength machines are intended to exercise the muscles of the human
body. The user sits on the training seat, activates the machine with his or her
personal RFID chip card and performs the prescribed movement. There are vari-
ous training modes available, which affect the movement of the training lever.
When using eGym strength machines, pay attention to the following:
u
the safety instructions in the operating manual
u
the technical data in the operating manual
u
regular cleaning and inspection
u
At each start-up check that the eGym strength machine is in perfect condition
The following are regarded as an improper way of application with foreseeable
maloperation:
u
use outdoors
u
use by people who are too heavy, too tall or too short
(authorised people: < 150 kg, 160 cm - 195 cm, > 16 years)
u
use in medical treatment facilities
u
exercising of a different muscle group to the one prescribed
u
any use other than that prescribed
4
Installation conditions for an eGym strength machine
The following technical conditions must be met for the use of eGym strength ma-
chines. The delivery of eGym strength machines is subject to certain requirements
in terms of the customer‘s data connection and power supply.
If these requirements are not met, eGym strength machines cannot and will not
be installed.
The eGym strength machines need to be placed on firm ground.
When personal RFID transponders are used, it is important to first check that these
are compatible with the eGym strength machines. To test this, please send to the
contact address above (see page 2):
– a copy of the manufacturer data sheet
– a sample copy of the RFID transponder
Summary of Contents for M1 Leg Extension
