13
6
Initial start-up, setup and dismantling of the
eGym strength machines
The assembly and disassembly and commissioning of the eGym strength machi-
nes must be performed by an eGym service technician or a person authorised by
eGym.
If eGym strength machines are dismantled or transported by the studio opera-
tor, eGym cannot guarantee that they will function properly or safely. Improper
transport or relocation may damage the eGym strength machines and will invali-
date the warranty.
7
Switching an eGym strength machine on and off
Every eGym strength machine can be connected to a plug socket (230 V) protected
in accordance with the installation requirements. The main switch, which lights
up green, disconnects the eGym strength machine from the power supply and
puts it into sleep mode.
Main Switch
Off
On
After an eGym strength machine is switched on, all motors of the automatic station
settings move through the entire setting range for calibration purposes.
If the power supply to an eGym strength machine fails, the training result is not
documented and the machine restarts. If power supply is restored the eGym
strength machine restarts automatically.
Every time the user logs in using his or her personal RFID chip, lever and seat of the
eGym strength machine automatically move into the user‘s preset training position.
At the end of a set of exercises the eGym strength machine automatically moves
into the standard position.
The on/off switch may not be operated with the foot.
Summary of Contents for M1 Leg Extension
