English
In
professionel 4+ -
250 (Typ 2271) and 250 T (Typ 2371): 1. Filter cartridge with EHEIM MECH
pro
. 2. Filter
cartridge with EHEIM SUBSTRAT
pro
, white filter fleece and screened cover.
In
professionel 4+ -
350 (Typ 2273), 350 T (Typ 2373)
and
professionel 5e -
350 (Typ 2274): 1. Filter cartridge
with EHEIM MECH
pro
. 2. Filter cartridge with EHEIM bioMECH. 3. Filter cartridge with EHEIM SUBSTRAT
pro
,
white filter fleece and screened cover.
In
professionel 4+ -
600 (Typ 2275): 1. Filter cartridge with EHEIM MECH
pro
. 2. Filter cartridge with EHEIM MECH
pro
. 3. Filter cartridge with EHEIM bioMECH. 4. Filter cartridge with EHEIM SUBSTRAT
pro
, white filter fleece
and screened cover.
10. Insert the prefilter (4) with the blue filter mat (1) (place onto supports
fi
arrows). 11. Attach the pump head
(17) (observe fitting position) and close the locking clips (8).
Note:
Use original EHEIM hoses only.
12. Attach the pre-assembled hose accessories (see
II
) to the aquarium. 13. Cut hoses (23) to the desired length
and attach to the fittings. 14. Plug the hoses (24) onto the safety adapter (13) down to the limit stop. 15. Attach
the hose locking device (11). 16. Push the safety adapter (13) into the pump head (17) until it audibly latches.
17. Set the locking lever (12) to
„ON“
. 18. Assure the the nozzle pipe (26) is suspended above the water sur-
face. 19. Rapidly press the suction aid (16) several times consecutively until the filter tank (10) automatically
fills with water (no water must be present in the prefilter!). 20. Plug in the power supply unit (30) at the pump
head (17) (only in
professionel 5e
- 350 Type 2274). 21. Plug in the power cable (31) of the filter
Caution:
Operate the heater only (by plugging in the heater power cable) when the water starts circulating and the filter
supplies water 22. To vent the priming aid (16) press again 1 or 2 times and push the nozzle tube (26) into the
desired position.
System Requirements
WLAN-capable end device (smartphone, tablet, notebook etc.)
6.1 Creating a Network
Put the exterior filter into operation by plugging in the mains plug. The status LED of the pump head lights up:
• White flashing LED: Network is being sought or created.
• Blue LED: The controller has created a new network.
6.2 Connecting to the WLAN network #EHEIM Filter_XXXXXXXX
Open the network settings of the end device, for example, notebook, tablet or smartphone, and connect to the
WLAN network, #EHEIM Filter_XXXXXXXX..
6.3 Calling up the website
Open the internet browser and call up the web address
http://eheimdigital.local
or
http://192.168.1.1.
6.4 Start the Configuration
Select the desired language in the language selection field and proceed with the initial configuration. Follow the
instructions accordingly. Detailed instructions can be downloaded via QR code on the title page or under
www.eheim.com
.
6. Operation (only on professional 5e 350, Type 2274)
22
7. Thermofilter
professionel 4+
- 250 T (Typ 2371) / 350 T (Typ 2373),
see III
Only thermofilter:
33.
Control indicator („ON“ / „OFF“)
34.
LED indicator in Celsius (°C)
35.
Status indicator for
target temperature in Celsius (°C)
36.
Pushbutton
37.
Display in Fahrenheit (°F)
38.
Heating spiral.
Setting range of the target temperature 18° – 34°C 64° – 93°F
Factory setting of the target temperature 24°C / 75°F
Summary of Contents for 2271
