English
11
4. Insert the LED light with the T5/T8 adapter into the lamp socket
m
via the end cap (⌦N).
5. Screw down the end cap (⌦O).
6. Maintenance
Attention! Electrocution!
▶ Before maintenance work, remove the mains plug of the power supply unit.
Caution! Material damage.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
▶ Before cleaning, allow the light to cool down for 5-10 minutes.
The following sections describe maintenance work necessary for optimum and fault-free operation. Regular
maintenance prolongs the service life and secures functionality of the LED light over a long period.
Cleaning the LED light
1. Allow the light to cool down for 5-10 minutes.
2. When required, clean the LED light with a soft, damp cloth.
7. Clearing faults
LED light does not illuminate
Possible cause
Mains plug of mains socket not connected
Remedy
▶ Insert the mains plug in the mains socket
Possible cause
LED light plug not connected to the power supply unit (only 740 mm, 940 mm and 1140 mm LED lights)
Remedy
▶ Connect the plug to the socket of the power supply unit and tighten the union nut
For other faults, please contact EHEIM Service.
8. Decommissioning
Disposal
When disposing of the appliance, heed the respective statutory regulations.
The appliance may no longer be disposed of with the municipal or household waste. The appliance will be
accepted free of charge at municipal collection points or recycling centres. The product packaging is made up of
recyclable materials. Dispose of them in an environmentally responsible manner and take them for recycling.
