300781 • 1/2019 • H.S.
37 of 70
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 3x3
4 Installation
Connecting the HP-Hose to trigger gun
○
Attach the hose end with the bend protection to the trigger
gun and tighten by hand.
Mounting the trigger gun onto the spray lance
○
Pull back the quick lock (see figure lower left) of the trigger
gun and insert the lance.
○
After inserting the lance, make sure that the quick lock ar-
rests fully forward again.
Connecting to the water supply net
○
Connect the a water supply hose 1/2“ (DN13) to the adapter
on the pump water inlet.