300781 • 1/2019 • H.S.
41 of 70
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 3x3
5 Commissioning
5
Commissioning
WARNING
Commissioning must be carried out professional.
For commissioning, operators must follow the instructions in this section.
Otherwise the life and limb of persons may be endangered.
The Ehrle high pressure cleaners are subjected to a final test for correct
function and safety before delivery.
The first commissioning and the first cleaning operation serve to check
the correct functioning of the device, if damage to components that is not
immediately visible during transport has occurred.
If the device functions incorrectly, consult the EHRLE customer service
immediately.
5.1
Select location for device operation
WARNING
Select a suitable and permissible operating location.
The local regulations concerning the installation and operation of the
device must be observed.
The devices listed in this manual must not be set up and operated in
rooms or areas subject to fire or explosion hazards.
When selecting the location for device operation observe:
●
The socket for the mains cable connection must be within easy reach
(provide an extension cable if necessary).
●
Water inlet hose of sufficient length for connection to fittings of the
water supply network or water tap.
●
Select a suitable washing place for the cleaning object.
Do not set up the device in very wet areas (e.g. areas with puddles) or
operate it under water. Do not lay cables and cable plugs in wet areas.