300781 • 1/2019 • H.S.
56 of 70
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 3x3
7 Decommissioning
Remove the HP-Hose from the high pressure outlet (pump).
Wind up the power cable on the device holder.
Roll up HP-Hose.
Stow the accessories on the device holdings provided.
7.1.2
Device version Premium
After completion of cleaning work for temporary decommissioning until
the next use, proceed as follows:
End operation with cleaning detergents (see Section 6.5.3) by turning
the detergent control valve (4, Fig. 6 - 1) counterclockwise to right stop.
Then rinse high pressure cleaner for at least 30 seconds.
Switch off the device via device switch 0/I (3, Fig. 6 - 1) (into position 0).
Close the water supply from the tap water network via the shut-off
valve.
Remove water inlet hose from
○
device adapter for water inlet connection
(see Section 3, device version Premium rear views).
○
fittings of the water supply network or water tap.
Pull the trigger lever (4, Fig. 6-2) of trigger gun until the hight pressure
cleaner is depressurised.
WARNING
Lock the lever of the trigger gun after completion of cleaning work.
After deactivating the trigger gun, lock the trigger lever (4, Fig. 6-2)
against unintentional switching on by means of the locking lever (5, Fig.
6-2). Ensure that the locking lever is correctly positioned in the notch for
the locking lever (6, Fig. 6-2).
Unintentional activation of the trigger gun after restarting the device
can endanger life and limb of persons.
Lock the trigger lever (4, Fig. 6-2) of the trigger gun against unintenti-
onal switching on using the locking lever (5, Fig. 6-2). Ensure that the
locking lever is correctly arrested in the notch for locking lever (6, Fig.
6-2).
Remove HP-Hose from the trigger gun.
To empty the high pressure pump, hold the HP-Hose and switch on the
device only until no more water escapes at the end of the hose.
Disconnect the mains cable plug from the electrical mains socket.
Wind up the power cable onto the device holder.
Wind the HP-Hose onto the hose reel.
Stow the accessories on the device holdings provided.
