Amphion User Guide
Page 12 of 26
Operating the Amphion
The Amphion is an integral part of the ei
3
secure network. Amphions
must be configured with information for the local internet access,
and the LAN of the equipment with which you want to connect and
collect data. The configuration process identifies the following facts
about the network environment:
•
The identification of the Amphion device within the ei
3
secure network,
•
The method of connection to the Internet, and,
•
The addresses of the equipment that is protected by the
Amphion device.
Amphion Project and Serial Numbers
The Amphion devices have a 6-digit alphanumeric serial number
that is unique to each device and does not change. When
configured, the Amphion is assigned an ei
3
Project number which
should be written or printed on the device label. This project
number is used to identify the Amphion within the ei
3
managed
secure network for controlling access and connections to your
equipment. The project number is in the format xxxx-yy where xxxx
is an alphanumeric string that designates the facility’s Amphion
network, and yy is a number where -00 is the green box and each
subsequent number indicates an additional machine. The black box
uses -01 only.
The Amphion Serial # and
ei
3
Project # are located here
