12
Technical Data
Chisel hammer
EMH 650
Rated voltage:
230 V ~
Power input:
650 W
Order number:
02511
Frequency:
50 - 60 Hz
Spindle connection:
SDS-plus
No-Load impact rate:
0-3200 min
-1
Electronic impact rate pre-selection:
yes
Impact energy per stroke according to EPTA-Procedure
05/2009:
4,2 J
Chisel positions:
12
Protection Class:
II
Degree of Protection:
IP 20
Weight according to EPTA-Procedure 01/2003: about 3.4 kg
Interference Suppression:
EMC Directive
2004/108/EG
Subject to technical alterations!
Supply
Chisel hammer with 1 pointed chisel, 1 flat chisel, 1 tile chisel (angled)
and operating instructions in a plastic case.
Application for Indented Purpose
The chisel hammer EMH 650 is indented for light-duty construction jobs like
removing tiles, chiselling plaster, bricks, concrete and other materials by
means of chisels with SDS-plus connection.
Safety Instructions
If the connection cable gets damaged or cut during the
use, do not touch it, but instantly pull the plug out of the
socket. Never use the tool with a damaged connection
cable.
Prior to drilling in walls and ceilings, check them for
hidden cables, gas and water pipes and other media.
Check the working area, e.g. using a metal detector.
The tool must neither be wet nor used in humid
environment.
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
