16
Change position of chisel:
The chisel can be fixed in 12
positions. Pull the fastening ring of
the chisel forward and turn it.
In the desired operating position
release the fastening ring to its initial
position.
Care and Maintenance
Before starting with the maintenance- und repair works
you have to disconnect the plug from the mains.
You can reach a longer life of the chisel and a higher productivity only by
using very well sharpened chisel.
Using blunt tools reduce the productivity and can cause troubles. When you
realise indications of wear, edge or change the tool.
Repairs have to be carried out only by qualified and due to education and
experience suited personnel.
After every repair the machine has to be inspected by an electric specialist.
Due to its design, the machine needs a minimum of care and maintenance.
The following works have to be carried out regularly:
The electric tool as well as the ventilation slots always has to be
clean.
During work, please pay attention that no foreign elements get into
the interior of the machine.
In case of failure, a repair has to be carried out by an authorized
service workshop.
Environmental Protection
Raw material recycling instead of waste disposal
In order to avoid damages on transportation, the power tool has to be
delivered in sturdy packing. The packing as well as the tool and its
accessories are made of recyclable materials and can be disposed
accordingly.
The tool’s plastic components are marked according to their material,
which makes it possible to remove environmental friendly and
differentiated because of available collection facilities.
