15
Water Supply
Connect the tool to the water supply system or a water tank using the
GARDENA connector.
Attention! The max. water pressure should not exceed 6 bar. In case the
water pressure is higher, you should use a pressure reducer. Please use a
GARDENA hose coupling as connecting piece to the machine. The hose
coupling is available on the market. Only use clear tap water.
In case water leaks from the overrun bore hole in the water supply, stop
working and have the tool repaired by an authorised service workshop.
Switching on and off
Short-Time Operation
Switching-on: press the on/off switch
Switching-off: release the on/off switch
Permanent Operation
Switching-on: press the on/off switch and, keeping it pressed, engage the
lock button
Switching-off: press the on/off switch and let release it again
Attention!
Only press the arrestor button when using a stand. In case of every
stop of the machine, the arrestor button has to be released
immediately by pressing the on/off switch. Consequently, you can
avoid an unintentional restart of the machine (physical hazard).
