28
Lamp Information
Getting to Know the Lamp Hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by
the built-in timer.
To obtain the lamp hour information:
Press
MENU
button
and then press button to the
Information
category
You will see the
Equivalent lamp hour
information displaying on the menu
To leave the menu, press
MENU
button.
Timing for Replacing the Lamp
When a message appears “Please change the lamp”, please install a new lamp or consult your dealer.
An old lamp may cause a malfunction in the projector and the lamp may explode in some instance.
CAUTION
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot.
Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still
lights up after turning the power on, please contact your dealer. See "Indicators" on page 32 for
details.
The following lamp warning displays will remind you to change the lamp.
Status
Message
When the projection lamp of the projector reaches its end of
life, "Please change the lamp " will be shown every time
when the projector is on.
Replacing the Lamp
1.
To remove the screws showed as
1
to open the lamp door showed as
A
Summary of Contents for EIP-XSP2500
Page 1: ...DLP Projector EIP XSP2500 Owner s Manual ...
Page 41: ...37 Dimension ...