GB
GB
- 22 -
3. Proper use
The lawn mower is intended for private use i.e. for
use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the equipment is
primarily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
Important. Due to the high risk of bodily injury to
the user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vege-
tation, planted roofs, or balcony-grown grass, to
clean (suck up) dirt and debris off walkways, or
to chop up tree or hedge clippings. Moreover, the
lawn mower may not be used as a power cultiva-
tor to level out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind, unless they have been expressly per-
mitted by the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage ...................................................36 V d.c.
Motor speed: ........................................3400 min
-1
Protection type: .............................................IPX1
Protection class:.................................................III
Weight: ......................................................16,4 kg
Cutting width: ..............................................41 cm
Grass basket volume: ..............................50 liters
Sound pressure level L
pA
: .................... 82,2 dB(A)
Uncertainty K
pA
: ........................................ 3 dB(A)
Sound power level L
WA
: ........................ 94,0 dB(A)
Uncertainty K
WA
: .................................. 2,01 dB(A)
Guaranteed sound power level L
WA
: ........ 96 dB(A)
Vibration at the handlebars ah: ............3,432 m/s
2
Uncertainty K: ..........................................1.5 m/s
2
Cutting height adjustment: ......25-75 mm; 6 levels
2x Power X-Change lithium-ion batteries
Voltage: .................................................. 18 V DC
Capacity: ...................................................4.0 Ah
Number of cells: .............................................. 10
2x Power X-Charger battery charger
Input voltage: .....................200-250 V ~ 50-60 Hz
Output voltage: ...................................... 20 V DC
Output current: ............................................3.0 A
Protection class:............................................II /
&
Sound and vibration values were measured in ac-
cordance with the standards EN ISO 3744:1995,
EN ISO 11201: 1996 and EN ISO 20643:2008.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The fol-
lowing hazards may arise in connection with
the equipment‘s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is applied.
Warning!
This equipment generates an electromag-
netic field during operation. Under certain
circumstances this field may actively or pas
-
sively impede medical implants. To reduce
the risk of serious or fatal injuries, we recom-
mend persons with medical implants to con-
sult their doctor and the manufacturer of the
medical implant prior to using the equipment.
5. Before starting the equipment
The lawn mower is delivered partly assembled.
The push bar and the grass basket must be as-
sembled before using the lawn mower. Follow the
instructions step by step and refer to the pictures
when assembling.
Important!
Required assembly parts (screws,
cable guides, etc.) or functional parts (e.g. plugs,
wrenches, etc.) can be found in the molded parts
of the packaging or on the equipment.
There are three contacts on the right-hand teeth
of the handlebar adjustment facility (Fig. 3/Item
D), as well as on the right-hand push bar (Fig. 3/
Item E). The contacts are for connecting the elec-
trical connections of the motor and switching bar.
To avoid a loose connection while mowing, which
would cause the motor to stop, the contacts on
the handlebar adjustment facility and the push
bar must be pressed firmly together. If necessary,
turn the quick-release lever on the right-hand side
in a clockwise direction a little after flipping it back
into the closed position.
Fitting the push bar
Use the quick-tightening screws (Fig. 2/Item 16)
to fasten the push bar (Fig. 2/Item 13) to the teeth
of the handlebar adjustment facility. If necessary,
turn the quick-tightening screw back sufficiently
on the thread so that the quick-release lever (Fig.
4/Item 16a) can then still be flipped down towards
the back.
You can adjust the angle of the long handle as a
whole by flipping up the two quick-release levers
(Fig. 5/Item 16a), with three settings available
for the angle (Fig. 5). Only these three positions
are available. As you do this, make sure that both
sides are set to the same position. To secure the
push bar again, flip the two quick-release levers
back into the closed position.
You can adjust the angle of the upper push bar
(Fig. 6a) by flipping up the two upper quick-re
-
lease levers (Fig. 6/Item 16a), with three settings
available for the angle. As you do this, make sure
that both sides are set to the same position. To
secure the push bar again, flip the two quick-
release levers back into the closed position.
Fitting the catch basket
Finally, press the carry-handle (Fig. 7/Item 5b)
onto the top part of the housing of the catch bas-
Anl_GP_CM_36_41_Li_SPK7.indb 22
Anl_GP_CM_36_41_Li_SPK7.indb 22
26.08.2021 10:06:01
26.08.2021 10:06:01
