EN
- 12 -
•
Air hose 8.2 ft (2.5 m)
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more speci
fi
c
models of batteries and charger available in your
area. You can also explore b charger
options at Einhell.com.
3. Intended use
The cordless air compressor is designed to
generate compressed air for compressed air
driven tools.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............. 36V
(2x 18V)
Compressor speed: ................. 3200 RPM (min
-1
)
Max. Operating pressure: ..........135 PSI (9.3 bar)
Pressure vessel capacity: ............. 1.6 Gallon (6 l)
Theoretical suction rate: ......4.59 CFM (130 l/min)
Output (compressed air)
at 102 PSI (7 bar): ................1.34 CFM (38 l/min)
Output (compressed air)
at 58 PSI (4 bar): ..................1.94 CFM (55 l/min)
Protection type: ............................................IPX0
Weight: ........................................22 lbs (10.5 kg)
5. Before starting the equipment
Before you connect the equipment to the power
supply make sure that the data on the rating plate
is identical to that of the rechargeable battery.
•
Check the equipment for damage which may
have occurred in transit. Report any damage
immediately to the transport company which
was used to deliver the compressor.
•
Install the compressor in the vicinity of the
point of consumption.
•
Avoid long air lines.
•
Make sure that the intake air is dry and
dustfree.
•
Do not install the compressor in a damp or
wet room.
•
The compressor may only be used in suitable
rooms (with good ventilation and an ambient
temperature from 41 °F to 104 °F (+5 °C to
40 °C). There must be no dust, acids, vapors,
explosive gases or inflammable gases in the
room.
•
The compressor is designed to be used in dry
rooms. It is prohibited to use the compressor
in areas where work is conducted with
sprayed water.
•
Operate the equipment only on a firm, level
surface.
•
Use flexible hoses in order to prevent
transmitting unacceptable loads to the
pipeline system at the connection between
the compressor system and the pipeline
system.
•
It is essential to use separators, traps and
drains which process the liquids produced
by the compressor before the compressor
system is put into operation.
Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb 12
Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb 12
21.04.2022 12:54:40
21.04.2022 12:54:40
