background image

The guarantee provided in this Guarantee Certificate is given by Einhell Australia Pty Limited 

 ACN 134 632 858 of 6/166 Wellington Street, Collingwood, Victoria (Telephone number 1300 922 271)

GUARANTEE

CERTIFICATE

EINHELL AUSTRALIA PTY LTD

6/166 Wellington Street

Collingwood VIC 3066

Australia

Phone: 1300 922 271

Dear

Customer,

All of our products undergo strict quality checks. In the unlikely event that your device develops a fault, please 

contact our service department at the address shown on this guarantee certificate. Of course, if you would 

prefer to call us then we are also happy to offer our assistance under the service number printed below. 

Please note the following terms under which  claims under the Einhell Express Guarantee can be made: 

 

1. 

The benefits conferred by the Einhell Express Guarantee are in addition to all rights and remedies which 

you may be entitled to under the Australian Consumer Law, and any other statutory rights you may have 

under other applicable laws.  This Einhell Express Guarantee does not exclude, restrict or modify any 

We do not charge you for the Einhell Express Guarantee.

2. 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are 

entitled to  a replacement or refund for a major failure and for compensation for any other reasonably 

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods 

fail to be of acceptable quality and the failure does not amount to a major failure. 

3. 

The Einhell Express Guarantee only covers problems caused by material or manufacturing defects, and 

our liability under the Einhell Express Guarantee is limited, at our discretion, to the rectification of these 

defects or replacement of the product. Please note that the product has not been designed for use in 

commercial, trade or industrial applications. Consequently, the Einhell Express Guarantee will not apply 

if the product is used in commercial, trade or industrial applications or for other equivalent activities.  

4. 

The following are also excluded from the Einhell Express Guarantee: compensation for transport 

damage, damage caused by failure to comply with the installation/assembly instructions or damage 

caused by unprofessional installation, failure to comply with the operating instructions (e.g. connection to 

the wrong mains voltage or current type), misuse or inappropriate use (such as overloading of the 

product or use of non-approved tools or accessories), failure to comply with the maintenance and safety 

regulations, ingress of foreign bodies into the product (e.g. sand, stones or dust), effects of force or 

external influences (e.g. damage caused by the product being dropped) and normal wear resulting from 

proper operation of the product. The Einhell Express Guarantee will also not apply if any attempt is made 

5. 

The Einhell Express Guarantee is valid for a period of 2 years starting from the purchase date of the 

product. Claims made under the Einhell Express Guarantee should be submitted before the end of this 

guarantee period and within two weeks of the defect being noticed. No claims under the Einhell Express 

Guarantee will be accepted if submitted after the end of this guarantee period. The original guarantee 

period remains applicable to the device even if repairs are carried out or parts are replaced. In such 

cases, the work performed or parts fitted will not result in an extension of the guarantee period for the 

Einhell Express Guarantee, and the Einhell Express Guarantee will not apply for the work performed or 

6. 

To make a claim under the Einhell Express Guarantee, please send the relevant product postage-free to 

the address shown below and enclose either the original or a copy of your sales receipt or another dated 

proof of purchase. It would help us if you could describe the nature of the problem in as much detail as 

possible. If the defect is covered by the Einhell Express Guarantee, your product will be repaired 

immediately and returned to you, or we will send you a new device (at our election). 
Any costs incurred by you in making a claim under this Einhell Express Guarantee, unless specified 

otherwise in this guarantee certificate, must be borne by you.  

Of course, we are also happy to offer a chargeable repair service for any defects which are not covered by the  

scope of the Einhell Express Guarantee or for products which are no longer covered by the Einhell Express 

Guarantee. To take advantage of this service, please send the product to our service address. 

such rights or remedies.  

to tamper with the product. 

parts fitted. This also applies when an on-site service is used. 

(Einhell Express Guarantee).

Summary of Contents for 43.504.92













Reviews: