GB
- 25 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock,
fi
re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Explanation of the warning signs on the
equipment (Fig. 27):
1. Warning!
2. Read the directions for use before operating
the equipment!
3. Wear protective headgear, goggles and ear
mu
ff
s!
4. Wear sturdy, non-slip footwear!
5. Wear safety gloves!
6. Protect the equipment from rain and damp!
7. Be careful of objects being thrown out.
8. All bystanders must be kept at least 15 m
from the machine!
9. The equipment continues to rotate!
10. Beware of recoil!
11. Do not use any saw blades.
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1 Battery
2 On/O
ff
switch
3 Safety lock-o
ff
4 Strap attachment
5 Additional handle attachment
6 Top part of long handle
7 Handle connecting piece
8 Union nut
9 Bottom part of long handle
10 Motor housing
11 Spool housing
12 Locking lever
13 Line safety guard
14 Line cutter
15 Safety hood
16 Additional handle
17 Handle screw
18 Line spool
19 Line
20 Harness
21 Cutting blade
22 Multifunction tool
23 Pressure plate
24 Pressure plate cover
25 Hex nut M10, self-locking
26 Cable clips
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Anl_Agillo_SPK9.indb 25
Anl_Agillo_SPK9.indb 25
29.03.2018 10:00:39
29.03.2018 10:00:39
