GB
- 17 -
7.2 Maintenance
•
Ensure that all mounting components (i.e.
screws, bolts, nuts etc.) are always tightened
so that the mower can be safely operated at
all times.
•
Replace excessively worn or damaged parts
immediately.
•
In order to ensure that you enjoy the equip-
ment for many years to come, all screwed
parts, as well as the wheels and axles, should
be cleaned and lubricated.
•
The blade on the mower spindle is subject to
more wear and tear than any other compo-
nent of the unit. Check the condition of the
blade on the mowing spindle at regular inter-
vals and make sure that it is tightly fastened.
•
If the blades on the mower spindle become
blunt and need replacing, please contact our
customer service. Use only genuine spare
parts.
7.2.1 Setting the counter blade (Fig. 10)
Warning
! Wear safety gloves.
Note:
The counter blade (E) is only be adjusted
before using the machine for the
fi
rst time or if the
blades on the mower spindle are worn.
Undo the adjusting nuts (C) (10 mm) on both
sides and adjust the counter blade to the required
position. The counter blade (E) is correctly adjus-
ted if a piece of paper placed between the blades
on the mowing spindle and the counter blade is
cut if you turn one of the wheels forwards by hand.
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o
ffi
ces.
9. Storage and transport
Storage
Store the equipment and accessories out of
children‘s reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C. Store the machine in
its original packaging.
Transport
•
Always carry the mower by its handle and ne-
ver reach into the cutting mechanism.
•
Fit the shipping protectors, if any.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine against slipping and tip-
ping over.
Anl_GC_HM_30_SPK7.indb 17
Anl_GC_HM_30_SPK7.indb 17
22.06.15 12:29
22.06.15 12:29
