8.4 Preparing the mower for transport
1.
Empty the petrol tank (refer to point 8.3/1)
2.
Always let the engine run until it has used up the
remainder of petrol in the tank.
3.
Empty the engine oil from the warm engine.
4.
Remove the spark plug boot from the spark plug.
5.
Clean the cooling fins of the cylinder and the
housing.
6.
Unhook the starter cable from the hook (Fig. 3c).
Slacken the star nuts and fold down the upper
push bar. Make sure that the cables do not get
kinked when the bar is pulled up.
7.
Wedge a few layers of corrugated cardboard
between the upper and lower push bars and the
engine in order to prevent any chafing.
8.5 Consumables, wear materials and spare
parts
Spare parts, consumables and wear materials such
as engine oil, V-belts, spark plugs, air filter inserts,
petrol filters, batteries and blades are not covered by
the warranty.
8.6 Ordering replacement parts
Please provide the following information on all orders
for spare parts:
n
Model/type of the equipment
n
Article number of the equipment
n
ID number of the equipment
n
Part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
28
GB
Anleitung_GH_PM_46_S_SPK7__ 15.04.13 13:55 Seite 28
