22
GB
is running and make sure of your footing.
n
Make sure that the switch on the machine is set
to the correct position for the work you want to
perform before you put the machine into opera-
tion. If the switch is not in the correct position you
risk suffering bodily injury when the machine
starts to run.
Do not lose these safety instructions
2. Layout (Fig. 1)
1. Dust
guard
2. Locking
sleeve
3. Selector switch for drill/hammer drill/chisel
4. ON/OFF
switch
5. Handle
6. Additional
handle
7. Depth
stop
8. Press
control
9. Clockwise/counter-clockwise
switch
10. Clamping screw
3. Items supplied
Take all the parts out of the packaging.
Check that nothing is missing.
n
Additional handle
n
Depth stop
n
Operating instructions
4. Proper use
The tool is designed for drilling with hammer action in
concrete, rock and brick, as well as for chiseling
work, always using the respective correct drill or
chisel bit.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745-1 and EN 60745-2-6.
The hammer drill is not designed for outdoors use as
specified I Article 3 of Directive
2000/14/EC_2005/88/EC.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Additional information for electric power tools
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
n
Vibration values exceeding 2.5 m/s
2
may cause
damage to the joints in your hand and arm.
n
Only use appliances which are in perfect working
order.
n
Service and clean the appliance regularly.
n
Adapt your working style to suit the appliance.
n
Do not overload the appliance.
n
Have the appliance serviced whenever
necessary.
n
Switch the appliance off when it is not in use.
n
Wear protective gloves.
Anleitung_RT_RH_26_SPK8__ 24.01.13 08:36 Seite 22
