After Sales Support
EMAIL: service.australia@einhell.com
TEL: 1300 922 271
a.
and in the manner intended for the particular
type of power tool, taking into account
the working conditions and the work to be
performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Service
a.
Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the safety
of the power tool is maintained.
6. Recommendation
We recommend that the tool always be supplied via
residual curtrent device with a rated residual current of
30 mA or less.
2. Additional Safety Rules
Safety Information for hammer
1.
Wear ear protection. The impact of noise can
cause damage to hearing.
2.
Use the additional handles supplied with the
tool. Losing control of the tool can cause
injuries.
3.
Hold the equipment by the insulated handles
when carrying out work during which the
plug-in tool could strike concealed power
cables or its own mains lead. Contact with a
live cable can also make the metal parts of
the equipment live and will cause an electric
shock.
Caution
Read the operating instructions to
reduce the risk of injury.
Wear ear-muffs.
The impact of noise can cause damage
to hearing.
Wear safety goggles.
Sparks generated during working or
splinters, chips and dust emitted by the
device can cause loss of sight.
Wear a breathing mask.
Dust which is injurious to health can be
generated when working on wood and
other materials. Never use the device
to work on any materials containing
asbestos!
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with
due care. Keep this manual in a safe place, so that
the information is available at all times. If you give
the equipment to any other person, give them
these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these
instructions and the safety information.
3. Layout
1.
Handle
2.
ON/OFF switch
3.
Additionalhandle
4.
Lockingbolt
5.
Toolchuck
6.
Inspection window / Oil filler opening
7.
Wrench
4. Proper Use
This machine is designed for heavy duty
demolition and chiseling work using the
appropriate chisel.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Mains voltage
230 V ~ 50 Hz.
Power input
1600 W
Blow rate
1500 min
-1
Protection class
II/
a
Weight
14.7 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
5
