EN
- 8 -
ensure these are connected and properly
used.
Use of these devices can reduce dust
related hazards.
h)
Do not let familiarity gained from frequent
use of tools allow you to become compla-
cent and ignore tool safety principles.
A
careless action can cause severe injury within
a fraction of a second.
4) Power tool use and care
a)
Do not force the power tool. Use the cor-
rect power tool for your application.
The
correct power tool will do the job better and
safer at the rate for which it was designed.
b)
Do not use the power tool if the switch
does not turn it on and o
ff
.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c)
Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing ac-
cessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these inst-
ructions to operate the power tool.
Power
tools are dangerous in the hands of untrained
users.
e)
Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may a
ff
ect the power
tool’s operation. If damaged, have the
power tool repaired before use.
Many acci-
dents are caused by poorly maintained power
tools.
f)
Keep cutting tools sharp and clean.
Pro-
perly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g)
Use the power tool, accessories and tool
bits etc., in accordance with these inst-
ructions and in the manner intended for
the particular type of power tool, taking
into account the working conditions and
the work to be performed.
Use of the power
tool for operations di
ff
erent from intended
could result in a hazardous situation.
h)
Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slip-
pery handles and grasping surfaces do not
allow for safe handling and control of the tool
in unexpected situations.
5) Battery tool use and care
a)
Recharge only with the charger speci
fi
ed
by the manufacturer.
A charger that is sui-
table for one type of battery pack may create
a risk of
fi
re when used with another battery
pack.
b)
Use power tools only with speci
fi
cally
designated battery packs
.
Use of any other
battery packs may create a risk of injury and
fi
re.
c)
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a
fi
re.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs,
fl
ush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the
battery may cause irritation or burns.
e)
Do not use a BATTERY pack or tool that is
damaged or modi
fi
ed
.
Damaged or modi-
fi
ed batteries may exhibit unpredictable beha-
viour resulting in
fi
re, EXPLOSION or risk of
injury.
f)
Do not expose a BATTERY pack or tool to
fi
re or excessive temperature.
Exposure to
fi
re or temperature above 266°F (130°C) may
cause explosion.
g)
Follow all charging instructions and do
not charge the BATTERY pack or tool out-
side the temperature range speci
fi
ed in
the instructions.
Charging improperly or at
temperatures outside the speci
fi
ed range may
damage the BATTERY and increase the risk
of
fi
re.
6) Service
a)
Have your power tool serviced by a qua-
li
fi
ed repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
b)
Never service damaged BATTERY packs.
Service of BATTERY packs should only be
performed by the manufacturer or authorized
service providers.
Additional safety instructions
We pay a great deal of attention to the design of
every battery pack to ensure that we supply you
Anl_TE_PL_18_82_Li_SPK7_USA.indb 8
Anl_TE_PL_18_82_Li_SPK7_USA.indb 8
31.03.2021 13:53:02
31.03.2021 13:53:02
