AFTER SALES SUPPORT
0151 649 1500
1890 94 62 44
www.einhell.co.uk
24
Safety
75W DETAIL SANDER – WZDS 75 K
WARNING!
Additional Safety Warnings
6) Detail Sander Use
a) Before starting the machine, check all screws, nuts, bolts and
other fastening materials to ensure that they are secure and that
all covers and guards are in good working order, and in position.
b) If foreign bodies become stuck in a motor vent
V
, or hole in
the base of the oscillating plate
4
, or the machine generates
unusual noises or vibrates in a strange way, switch off the detail
sander immediately and allow the motor to come to a standstill.
Do not use the detail sander again until it has been examined
for damage and / or any foreign bodies removed, and the dust
collection box
3
is emptied and the filter
F
underneath the
top of the dust collection box
3
is cleaned (See Fig. 6a - b on
page 23).
WARNING!
c)
Risks associated with using the detail sander. If used
improperly or in a negligent manner, the detail sander and
accessories can inflict serious injury!
- Carefully read through the instructions on proper handling,
preparatory steps, maintenance, starting and switching off
the detail sander and accessories.
- Familiarise yourself with the switch as well as proper use of
the detail sander.
77014_4460595_11016_UG.indd 26
18/04/2017 1:17 pm