AFTER SALES SUPPORT
0151 649 1500
1890 94 62 44
www.einhell.co.uk
29
Set up
75W DETAIL SANDER – WZDS 75 K
Set up
Before starting the equipment
This detail sander is delivered with some parts inside the box which may need to be removed
or assembled, before use.
CAUTION!
Check that all parts of the detail sander are in the box (the screw
7
should already be fitted to the sander oscillating plate
4
),
before starting to assemble, or use.
1. First Use
Checking the detail sander and product contents (See Fig. 1)
1. Carefully take the detail sander out of the packaging (The screw
7
is already
secured into the threaded hole in the oscillating plate
4
).
2. Check to make sure that the delivery is complete (see Fig. 1 on Page 3).
3. Check whether the detail sander or any of the parts/accessories exhibit any damage.
4. In the event of damages or missing parts, do not use the detail sander. Contact the
manufacturer via the service address indicated on the warranty card, or by using the
After Sales Support contact information.
5. If possible, please keep the packaging until the end of the guarantee period.
NOTICE!
The equipment and packaging material are not toys. Do not
let children play with plastic bags, or small parts. There is a
danger of swallowing or suffocating!
WARNING!
The dust collection box must be fitted at all times during the use
of the detail sander.
77014_4460595_11016_UG.indd 31
18/04/2017 1:18 pm