General operation
•
Charge the battery:
•
There are two ways to charge the
einstein
™
LabMate
+
:
1
Connect the
einstein
™
LabMate
+
to a PC using the USB cable
2
Connect the
einstein
™
LabMate
+
to a wall socket with a USB power cable
•
einstein
™
LabMate
+
battery may not be fully charged upon first use.
•
The
einstein
™
LabMate
+
may become warm when charging.
•
Power on einstein
™
LabMate
+
:
Press and hold the Power button for several seconds. The LED next to the Power
button will begin flashing green.
•
Pairing the einstein
™
LabMate
+
For Tablets:
•
Make sure the
einstein
™
LabMate
+
is turned on (the LED should be flashing green)
•
Go to Settings and make sure Bluetooth is turned on.
•
Tap the
einstein
™
LabMate
+
to pair it with the Tablet.
•
Pairing the einstein
™
LabMate
+
For PCs:
•
Make sure the
einstein
™
LabMate
+
is turned on (the LED should be flashing green)
•
Consult your computer manual for details on pairing with Bluetooth devices
•
Resetting the einstein
™
LabMate
+
:
Turn the
einstein
™
LabMate
+
off by pressing the power button.
Then reset by holding the power button down for 10 seconds.
•
Upgrading the einstein
™
LabMate
+
Firmware
: As new technologies come out,
we may upgrade the
einstein
™
LabMate
+
firmware to enhance its performance.
For further details and instructions go to
7
6
Download data collection
and analysis software:
•
MultiLab
™
•
MiLAB
™
•
einstein
™
World
