www.eisenblaetter.de
Phone +49 - 8171 - 93 84 - 0 Fax: +49 - 8171 - 93 84 - 55
P I P E - S N I P E R
®
P I P E / T U B E S A N D E R
You have made an excellent choice in purchasing the Pipe-Sniper pipe/tube sanding machine. Due to
the anovelty belt enclosing system for genuine 2/3 enclosure it is possible to have a complete 360 de-
gree pipe grinding from a single position without altering the position of the operator. The newly deve-
loped drive motor with 1,750 Watts makes a continuous use possible. Due to the balanced bow-type
bar handle the machine can be used in any conceivable position.
The Pipe-Sniper pipe/tube sander guarantees fatique free working with minimum force exertion
thanks to the revolutionary, sophisticated enclosure technique and the innovative new gas pressure
damper system.
Speed:
Easy, infi nitely variable speed regulation adjustable with the speed dial on the ergonomic handle:
1,000 - 3,800 rpm.
Step B-C+D
is the ideal speed for most of the belts for clean, shadow free surfaces.
For damaged or scratched surfaces the speed can be adjusted to a higher setting.
S
tep D-E
recommended for polishing belts
Step B-C
recommended for linishing belts
Speed positions
A
= 1,000 rpm
E
= 2,400 rpm
B
= 1,300 rpm
F
= 2,900 rpm
C
= 1,900 rpm
G
= 3,800 rpm
D
= 2,100 rpm
Applications:
Introduction:
■
ROHR-SNIPER
®
for pipe diameter
¡
from 25 to 42mm
for 2/3 enclosure
¡
up to 70 mm
or 1/2 enclosure
Pipe
