9
5. Selecting Turn-On Mode
ENG
This function is designed for use in the
event that the
power supply is fed by a specifically
designated switch. In this case, the
automatic activation mode must be
programmed in order to automatically
turn on the
unit
when the switch is activated.
These steps must be followed:
KBSOUND®PLUS
KBSOUND®PLUS
1. Supply power to the
unit by flicking the switch.
2. The
unit will flicker a couple of times and turn off.
3. Turn on the
unit using the remote control (ON/OFF key).
4. With the
unit turned on, keep the ON/OFF key pressed down
for 5”.
KBSOUND®PLUS
KBSOUND®PLUS
KBSOUND®PLUS
KBSOUND®PLUS
If the Turn-On mode is set
to “on”, the RED light will
flash once. In this state,
when power is fed to the
unit, it will turn on in
“ideal” mode (see Chapter
6. “Ideal Mode”).
If the Turn-On mode is set to “off”, the RED light will flash four times. In this state,
when power is fed to the unit, it will turn on in “off” mode.
BIP
5’’
Key Sequence
Sound Signal
CC-1088-05.1
