31
Chapter3SettingMonitor
3-8. Changing the authentication method for HDMI
signal input
The external device cannot be authenticated successfully according to your external device and the screen cannot
be displayed. In this case, follow the procedures below to change the authentication method.
Procedure
1. Press
on the remote control or on the monitor to turn OFF the monitor power.
2. Press
on the monitor for five seconds or more.
The authentication method changes and the monitor power is turned on.
Note
• The current authentication method can be identified based on the color used to display the input port or signal error.
Method
Input port
Signal Error
1
(Defaultsetting)
2
3-9. Resetting the Monitor to the Default Settings
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and Full
Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
“Main Default Settings” (page 52)
●
To reset the color adjustments
This function only resets the color adjustments for the currently selected mode to the default settings.
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Color Reset” in the “Color” menu, and press
.
3. Select “Yes” with
or
.
4. Press
.
The color adjustments revert to the default settings.
