- 10 -
Chapter 1 Introduction
●
Rear
15
16
9
14
17
6
7
8
11
12
13
10
6. Main power switch
Turns the main power on or off.
7. Power connector
Connects the power cord.
8. Input signal connectors
The following connectors are available on the monitor rear in order of left to right.
D-Sub mini 15-pin connector
DisplayPort connector
HDMI connector
DVI connector
9. Handle
This handle is used for transportation
10. USB downstream port
Connects to a peripheral USB device.
11. USB upstream port
Connects to the USB cable when using software that needs a USB connection, or when using the USB Hub function.
12. Headphone jack
Connects to headphones.
13. Stereo mini jack
Connects to a stereo mini jack cable.
14. Security lock slot
Complies with Kensington’s MicroSaver security system.
15. Speakers
Outputs audio.
16. Stand
*2
Adjusts the height and angle (tilt, swivel, and rotation) of the monitor.
17. Cable holder
*3
Holds the monitor cables.
*2 An optional arm (or optional stand) can be attached by removing the stand section (see
“6-1. Attaching the Optional Arm” (page 41)
*3 For the cable holder attachment procedure, see
“6-3. Attaching/Detaching the Cable Holder” (page 46)
.