Eizo FlexScan S2100-M, User Manual

11

Chapter 2  Settings and Adjustments

2-2 Screen 

Adjustment

Digital Input

When digital signals are input, images are displayed correctly based on the 

preset data of the monitor.

Analog Input

The monitor screen adjustment is used to suppress fl ickering of the screen or 

adjust screen position and screen size correctly according to the PC to be used.

To use the monitor comfortably, adjust the screen when the monitor is set up for 

the fi rst time or when the settings of the PC in use are updated.

[Adjustment Procedure]

• Automatic 

Adjustment

1

 Press 

.

A message “Your setting will be lost if you press again now” appears for 

fi ve seconds.

2

 Press 

 again while the message is displayed.

The Auto Adjustment function begins (showing a running status message) 

to adjust clock, phase, display position, and resolution automatically.

If satisfactory adjustment cannot be obtained with the 

 button, 

perform the adjustment following the procedure below. When the 

screen is displayed correctly, go to step 5 “Range Adjustment”.

• Advaced 

Adjustment

3

  Run the Screen Adjustment Program.

Load the EIZO LCD Utility Disk on the PC, and start the Screen 

Adjustment Program compatible with the PC in use.

After the program starts up, perform the adjustment in step 4 following the 

instructions of the program.

Attention

•  Wait 20 minutes or more from 

monitor power on before starting 
adjustments.

Attention

•  This function works correctly when 

an image is fully displayed over the 
Windows or Macintosh display area. 
It does not work properly when an 
image is displayed only on a part of 
the screen (DOS prompt window, for 
example) or when a black background 
(wallpaper, etc.) is in use.

•  This function does not work correctly 

with some graphics boards.

NOTE

•  Auto adjustment is available using 

. If satisfactory adjustment 

cannot be obtained with this button, 
perform advanced adjustments using 
the Adjustment menu.

•  Use “Screen Adjustment Program” on 

the supplied EIZO LCD Utility Disk.

NOTE

•  For how to start the Screen 

Adjustment Program, refer to 
“readme.txt” or the “Readme” fi le. 
When you are using a Windows PC, 
you can run the program directly from 
the start menu of the disk.

•  If no adjustment program is available 

for your PC, display a checkerboard 
pattern on the screen (see below) and 
go to the following steps.