Chapter 3 Setting Monitor
-. Setting the EIZO Logo Display [Logo]
This function allows you to display, or not, the EIZO logo.
Procedure
Press
to turn off the monitor.
Press
holding
down at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
Choose <Logo> from the <Optional Settings> menu, and press
.
Select “On” or “Off” with
or
, and press
.
Select “Finish” with
or
.
Press
to exit the Optional Settings.
The Optional Settings menu is closed.
-. Setting Orientation
●
Using Image Rotation Function [Image Rotation]
Image Rotaion function allows you to change the display orientation of the monitor with the panel
rotation. (Default settings : On)
Attention
After changing the display orientation, it may take some time until the screen image is available.
The Image Rotaion function may not work correctly using with some graphics card or OS.
When using the Image Rotation function with dual display, the screen image of either monitor can disapper. If so,
redisplay the image by "Display Properties" (for Windows only).
•
•
•
Procedure
Choose <Screen> from the Adjustment menu, and press
.
Choose <ImageRotation> from the <Screen> menu, and press
.
Select “On” or “Off” with
or
.
Press
to exit the adjustment.
Operationg Procedure
Turn the panel 90 degrees.
Since the default setting of <Image Rotation> is set to "Enable", the screen image
responding to the panel
orientation will be available.
When the screen image is expanded or contracted, restart the PC.
The Image Rotation function may not work correctly using with some graphics card or OS. When the screen
image remains to be expanded or contracted after restarting the PC, please try to change the screen resolution
setting of your PC system.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
1.
2.
Summary of Contents for RADIFORCE RX220
Page 45: ...Pb Hg Cd Cr VI PBB PBDE SJ T 11363 2006 SJ T 11363 2006...
Page 46: ......
