Example: The IP address is 192.168.1.70. and the
port value is 8090, the accessing address is
http://192.168.1.70:8090.
HTTPS Port
Before using the https, you must download https
authentication certification into the phone, then
set web browser port, the default is 443 port, if you
want to enhance system safety, you'd better change
it into non-443 standard port. You can access to the
web in https after rebooting the phone.
Telnet Port
Set Telnet Port, the default is 23.
RTP Port Range
Start
Set the RTP Start Port. It is dynamic allocation.
RTP Port Quantity
Set the maximum quantity of RTP Port, the default
is 200.
Notice:
Notice:
Notice:
Notice:
1) You need save the configuration and reboot the phone after set this
page.
2) Please REBOOT the system if you modify the HTTP or telnet port
number (the new number should be greater than 1024).
3) If you set 0 for the HTTP port, it will disable HTTP service.
