ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
CM 8SH CI-TC
USER MANUAL
The main
“CM Management”
screen enables easy identification of the different modules connected to
the power supply, as can be seen in the following screen:
Power supply and head-end manager (red).
Identification of a module with an input card (green) and an output card (blue).
Identification of a module with only one input card (green), two CIs (orange) and
one output card (blue).
Identification of a module with two input cards (green) and one output card (blue).
In this case it would be a power supply and three modules, each one with its
different internal cards.
Click on the corresponding module to enter its specific configuration menu.
Never open the CM MANAGEMENT program twice, this will cause configuration problems.
CM 8SH CI-TC module configuration:
1.
Selected module
2.
Selected module configuration
3.
Input card. Select between
DVB-S DVB-S2.
NO MULTISTREAM
4.
CI section. Activate Watchdog
5.
Output card. Select output
frequency in KHz.
FLEXIBLE channels and
different attenuations.
6.
Program pool available on the
configured inputs.
