background image

Electric Ovens  rev. 5

________________________________________________________

 EKF 416 AL P  - EKF 464 AL P 

 

__________________________________________________________________________________________ page 11 

14. Established warranty

  

Tecnoeka’s products are exclusively designed for food use and are covered by warranty 
complying with Laws Regulation article n. 1490 and following) for professional users such as VAT 
holder customers  purchasing from Distributor.  
Tecnoeka’s products are professional and certified according to the IEC 60335-1 standards and 
can only be sold to professional users. 
With the exclusion of any additional warranty, the Seller will repair, at its sole discretion, only 
those parts of its products which prove vitiated by an original defect provided that, subject to 
revocation, the customer has reported the defect within 12 months from 'purchase and reported 
the defect within 8 (eight) days of the discovery, in writing enclosing a copy of the invoice, 
receipt or sales receipt proving the purchase. 
As well as in the event that the customer is not able to produce the invoice, receipt or sales 
receipt proving the purchase or are not respected the terms outlined above, the guarantee is 
expressly excluded in the following cases: 
1) Any failure or breakage of components caused by transport. 
2) Damage caused by inadequate electrical, plumbing and gas installation than provided in the 
installation manual, or by an abnormal function of the same. 
3) Damage resulting from incorrect installation of the product, or installation not in accordance 
with the requirements in the installation manual, and in particular damage due to failure of the 
chimneys and the discharges which this product is connected. 
4) Product use for purposes other than those it is intended for, as specified and resulting from the 
technical documentation released by Tecnoeka. 
5) Damage caused by use of the Product not in accordance with instructions contained in the 
user and maintenance manual. 
6) Product tampering. 
7) Adjustment Operations, maintenance and repair of the product performed by unqualified 
personnel. 
8) Use of non-original or not authorized parts by Tecnoeka. 
9) Damage or defect caused by negligent and / or reckless of the product, or in contrast with the 
instructions prescribed by the instruction and maintenance manual. 
10) Damage caused by a fire or other natural events and in any case any damage by accident or 
addicted to any cause not dependent on the manufacturer. 
11) Damage to parts subject to normal wear that need to be replaced periodically. 
Also excluded from the guarantee: the painted or enameled parts, knobs, handles, mobile or 
removable plastic parts, light bulbs, glass parts, seals, electronic parts, and all the possible 
accessories, transport costs from the based consumer, the end user and / or purchaser to the seat 
of Tecnoeka Ltd. and vice versa. The warranty doesn't include also the oven's replacement costs 
and the related installation costs. The warranty excludes products purchased as used or 
purchased from third parties not connected or authorized by Tecnoeka. 
TECNOEKA SRL is not responsible for damages, direct or indirect, caused by the product failure, 
or following to the forced suspension of use of the same. 
Warranty repairs do not result in the extension or renewal thereof. 
Parts replaced under warranty are in turn a guarantee of 6 months from the date of shipment, 
attested by a movement document issued by Tecnoeka. 
Nobody is authorized to modify the terms and conditions of guarantee or to release other verbal 
or written. 

Summary of Contents for EKF 416 AL P













Reviews: