Electric Oven rev. 2 ____________________EKF 711 UD – EKF 664 UD (-HT) – EKF 664 UD/003 – EKF 616 UD (-HT)
___________________________________________________________________________________________ page 11
9.
9.
9.
9. Cleaning (WARNING:
Cleaning (WARNING:
Cleaning (WARNING:
Cleaning (WARNING: Cut power to the appliance before every operation)
Cut power to the appliance before every operation)
Cut power to the appliance before every operation)
Cut power to the appliance before every operation)
General cleaning
General cleaning
General cleaning
General cleaning - Clean the oven when it is cold. Wash enamelled parts with lukewarm water
and soap, do not use abrasive products, steel wool, or acids, which could ruin them. To clean
the steel parts, do not use products containing chlorine (sodium hypochlorite, hydrochloric acid,
etc) even if diluted. Use specific off-the-shelf products or a little hot vinegar. Rinse thoroughly
with water and dry with a soft cloth. Clean the glass door of the oven with hot water only, and
do not use rough cloths. Do not allow foods (especially acid foods such as salt, vinegar, lemon,
etc) to stagnate on the stainless steel parts, because they could deteriorate. Do not wash the
appliance with direct jets of water, because if water enters, this could limit the appliance's
safety. Do not use corrosive substances (e.g. hydrochloric acid) to clean the oven' s support
bench.
Cleaning the oven
Cleaning the oven
Cleaning the oven
Cleaning the oven - It is good practice to clean the oven interior at the end of every day of duty.
In this way it will be easier to remove cooking residues, preventing them from burning when the
oven is next used. Clean it accurately with hot water and soap or with the appropriate off-the-
shelf products.
Cleaning the door
Cleaning the door
Cleaning the door
Cleaning the door - The glass panel of the door facing inwards toward cooking compartment
can be cleaned with the same type of degreasing product used to clean the compartment.
Otherwise, you can use normal glass cleaning product (non toxic). A common glass detergent
can be used also to clean the glass panel of the door facing outward. In all cases, you may just
use tepid soapy water. After rinsing, thoroughly dry the glass surface with a soft cloth. If
opaque sections form between the two glass panels of the door, they can be eliminated after
dismantling the internal glass panel.
Cleaning the fans
Cleaning the fans
Cleaning the fans
Cleaning the fans - The fans must be periodically cleaned with specific anti-lime scale products.
All the parts must be carefully cleaned, removing all lime scale deposits. To have access to the
fans remove the fan casing after removing the screws that fix it to the cooking chamber. When
cleaning is complete, replace the casing and screws.
Cleaning the door seal
Cleaning the door seal
Cleaning the door seal
Cleaning the door seal - For hygiene and good operations, it is good practice to clean the door
seal at the end of each day’s work. It should be carefully washed with warm soapy water, rinsed
and dried with a soft cloth. Any incrustations or food deposits must be carefully removed,
without using sharp metal tools which could irreparably damage the seal.
10.
10.
10.
10. Maintenance
Maintenance
Maintenance
Maintenance
General information
General information
General information
General information - A periodic control (at least once a year) of the appliance aids to guarantee
long life and correct operations. Any sort of maintenance work on the appliance must be done
exclusively by technically qualified operators who have been trained in the maintenance work
on this appliance. Before beginning any sort of maintenance work on the appliance, turn the
power supply off (at the magnetothermal safety switch upstream from the appliance) and let it
cool down. Access is gained to the inside components that could require maintenance work by
removing the left side of the appliance.
Changing the lighting lamp in the cooking chamber
Changing the lighting lamp in the cooking chamber
Changing the lighting lamp in the cooking chamber
Changing the lighting lamp in the cooking chamber - The lamp is housed between the two
door glasses; to replace it remove the internal glass as described in the paragraph: “Cleaning
the door”. After removing the internal glass, replace the lamp with another with the same
specifications: 12V 35W 300°C (this is a halogen lamp and should not be touched with your
bare hands).