background image

_ TECNOEKA Srl __________________________________________________________ use and instruction manual _ 

_ page 10 _________________________________________________________________________________________ 

    

2.10  Water outlet

2.10  Water outlet

2.10  Water outlet

2.10  Water outlet    

There is a drainage pipe on the back of the appliance (see Fig. 1) for emptying the cooking 

chamber.  A  pipe  of  at  least  30  mm  internal  diameter  (DN30)  must  be  connected  to  this  pipe 
that  is  resistant  to  the  steam  temperature.  To  avoid  throttling,  we  advise  using  a  rigid  pipe 
without any elbow bends along its length. The pipe must have a constant inclination of at least 
5% along its length (the length is that from the outlet pipe from the appliance to the drain and 
must  not  exceed  1  meter  overall).  The  outlet  pipe  must  flow  into  an  open  drain  on  the  floor 
(Fig. 2). If not, there must be a difference in height between the outlet pipe on the appliance 
and the drain of at least 30 cm (see Fig. 3) to ensure the water flows out correctly. In conformity 
with hygiene regulations in force, the pipe connected to the water outlet pipe on the appliance 
must not be directly in contact with the outlet point.

 

 

max. 1 mt

 

 

m

in

. 3

0c

m

max. 1mt

 

Fig. 2

Fig. 2

Fig. 2

Fig. 2    

    

Fig. 3

Fig. 3

Fig. 3

Fig. 3    

 

    

2.11  

2.11  

2.11  

2.11  Thermal breaker safety devices

Thermal breaker safety devices

Thermal breaker safety devices

Thermal breaker safety devices

 

The  appliance  is  supplied  with  a  manually  resetting  thermal  breaker  to  protect  against 

excessive, dangerous temperatures which could be accidentally generated inside. If it is tripped, 
the device cuts off the power supply to the appliance. 

The  boiler  fitted  on  the  appliance  has  an  automatically  resetting  safety  thermal  breaker  to 

protect  the  heating  element  in  the  boiler  from  dangerous  overheating,  to  guarantee  constant 
working. 

    

2.12  

2.12  

2.12  

2.12  Electronic circuit protection

Electronic circuit protection

Electronic circuit protection

Electronic circuit protection    

The electronic circuit inside the electric components compartment is protected by fuses. 

    

2.13  

2.13  

2.13  

2.13  Disposing of the oven

Disposing of the oven

Disposing of the oven

Disposing of the oven    

The  appliance  is  made  using  recyclable  raw  materials  and  contains  no  toxic  or  harmful 

substances for people or the environment. The appliance, and its packaging, must be disposed 
of  in  conformity  with  the  current  regulations  in  force  in  the  place  of  installation.  The  various 
materials  used  for  its  construction  must  be  separated  and  delivered  to  the  specialised  waste 
disposal centres. In all cases the environment protection regulations must be strictly adhered to. 

Summary of Contents for KF 1010 EV UD





























Reviews: