eka KF 1010 EV UD Use And Instruction Manual Download

Page: 2 / 28

_ TECNOEKA Srl __________________________________________________________ use and instruction manual _

_ page 2 _________________________________________________________________________________________

Prodotti mirati per Ristorazioni, Pasticcerie,

Prodotti mirati per Ristorazioni, Pasticcerie,
Panetterie e Gastronomie

Panetterie e Gastronomie

TECNOEKA Srl

TECNOEKA Srl
Via I. Nievo, 12/B
35012 Camposampiero (PD)
Tel. +39 049 5791479 - +39 049 9300344
Fax + 39 049 5794387

www.tecnoeka.com

–

info@tecnoeka.com

DECLARATION OF CONFORMITY

Annex

Annexed documen

ed documen

ed document II A, of directive 2006

t II A, of directive 2006

t II A, of directive 2006////42

42////CE

Manufacturer

TECNOEKA Srl

Address

Via I. Nievo, 12/B

Via I. Nievo, 12/B ---- 35012 Camposampiero (Pd)

35012 Camposampiero (Pd)

Type of product

Electronic oven

Model

KF 1010

KF 1010 EV

EV UD

TECNOEKA Srl declares that the above mentioned products conform to the safety
regulations under:

- Low voltage directive 2006/95/EC

CEI EN 60335-1

CEI EN 60335-2-42

- Electromagnetic compatibility Directive 2004/108/EC

CEI EN 55014-1

CEI EN 55014-2

CEI EN 61000-3-2
CEI EN 61000-3-3
CEI EN 61000-4-2
CEI EN 61000-4-4
CEI EN 61000-4-5
CEI EN 61000-4-6

CEI EN 61000-4-11

- Machine Directive 2006/42/CE;

- Directive on the general safety of products 2001/95/EC;

- Directive on the restriction in the use of dangerous substances in electrical

and electronic appliances 2002/95/EC;

- Directive on waste from electrical and electronic appliances 2002/96/EC.

Camposampiero, 17/01/2011.

_________________________________

Signature of a Representative of the Board of

directors

X:\Sgq\PRODOTTI\Fam. 1 - FORNI\FORNO ELETTRICO\LEka\MANUALI D'USO - Forno Elettrico
40 60 90 - LEka\Instruction manual KF 1010 EV UD - GB - agg - rev. 1.doc

Summary of Contents for KF 1010 EV UD





























Search results

Summary of Contents for KF 1010 EV UD

Reviews:

Related manuals for KF 1010 EV UD

Brands by name

Popular brands

eka KF 1010 EV UD, Use And Instruction Manual

Search results

Summary of Contents for KF 1010 EV UD

Reviews:

Related manuals for KF 1010 EV UD

Brands by name

Popular brands