background image

12 

 

7. DISPOSAL OF THE APPLIANCE 

In  accordance  with  Directive  2012/19/EU  on  the  disposal  of  waste  electrical  and 
electronic  equipment,  the  crossed-out  wheeled  bin  symbol  on  the  equipment 
indicates that the product was placed on the market after 13 August 2015, and that 
at the end of its services life it must be disposed of separately from other waste.  
At  the  end  of  the  appliance’s  service  life,  the  user  must,  therefore,  deliver  it  to  the 
appropriate  centres  (recycling  centres)  for  the  separate  collection  of  electrical  and 
electronic waste. 
All  TECNOEKA  appliances  are  made  of  recyclable  metal  materials  (stainless  steel, 
galvanised sheet metal, iron, copper, aluminium, etc.) which make up more than 90% 
of  the  total  weight  of  the  appliance.  Before  disposing  of  the  appliance,  it  is 
recommended to make it unusable by removing the power supply cable and removing 
the mechanism for closing compartments and/or openings, if any. 
The  separate  waste  collection  and  subsequent  treatment,  recovery  and  disposal,  are  conducive  to  the 
production of equipment with recycled materials and reduce the negative effects on the environment and 
health possibly caused by incorrect waste handling. Illegal disposal of the product by the user entails the 
application of administrative penalties. 

 
8. CONVENTIONAL WARRANTY

 

The  Tecnoeka  product  is  designed  for  food  use  only  and  is  covered  by  warranty  according  to  law 
(art.  1490  and  subsequent  articles  of  the  Italian  Civil  Code)  for  Professional  Customers  or 
customers  who  purchase  from  the  Dealer  with  a  VAT  number.  The  Tecnoeka  product  is 
professional and certified according to IEC EN 60335-1 and can only be sold to professional users. 
With  the  exclusion  of  any  additional  warranty,  the  Vendor  agrees  to  repair,  at  its  sole  discr etion, 
only those parts of the products that prove to be tainted by an original fault as long as, subject to 
forfeiture,  the  customer  has  reported  the  fault  within  12  months  from  the  date  of  purchase  and 
reported  the  defect  within  8  days  from  the  date  of  discovery,  in  writing,  attaching  a  copy  of  the 
invoice, receipt or tax receipt as proof of purchase. 
Including the event  in  which the customer  is  unable to produce the invoice, receipt  or tax receipt 
as proof of purchase, meaning that the terms outlined above are not complied with, the warranty 
is expressly forfeited in the following cases: 
1) Faults or breakdowns of components caused by transport. 
2) Damage deriving from inadequate electrical, hydraulic and gas supply systems compared to that 

provided in the installation manual, or anomalous operation of these systems. 

3) Damage  deriving  from  incorrect  product  installation,  or  installation  not  carried  out  in 

accordance  with  the  installation  manual  and,  in  particular,  damage  due  to  the  inadequacy  of 
the flues and drains that the product is connected to. 

4) Using the product for purposes other than its intended use, as specified and resulting from the 

technical documentation issued by Tecnoeka. 

5) Damage due to using the Product in a manner that is not in line  with the instructions in the use 

and maintenance manual. 

6) Tampering with the product. 
7) Product adjustment, maintenance and repair activities carried out by unqualified personnel.  
8) The use of non-original spare parts or not authorised by Tecnoeka. 
9) Damage or defects caused by negligent and/or imprudent use of the product, or in contrast with 

the instructions set forth in the use and maintenance manual.   

10)  Damage  caused  by  fire  or  other  natural  events  and,  in  any  case,  by  unforeseeable 

circumstances or any other cause beyond the manufacturer’s control. 

11) Damage to components subject to normal wear that require periodic replacement.   
Also excluded from the warranty: painted or enamelled parts, knobs, handles, mobile or removable 
plastic  parts,  light  bulbs,  glass  parts,  gaskets,  electronic  parts  and  any  accessory  parts,  transport 
fees  from  the  consumer,  end  user  and/or  buyer’s  location  to  Tecnoeka  srl,  and  vice  versa. 
Replacement  costs  of  the  oven  and  relative  installation  expenses  are  also  excluded  f rom  the 
warranty.  The warranty does not cover Products purchased as used or from third parties who are 
not connected to or authorised by Tecnoeka. 
TECNOEKA  SRL  shall  not  be  held  liable  for  damage,  either  direct  or  indirect,  caused  by  a  product 
fault or as the result of the forced suspension of operation. 
Repairs under warranty do not result in the extension or renewal of coverage.  

Summary of Contents for MKF 1016 S

















Reviews: