Rear Panel Controls
5
1. AC INPUT INLET
2. FUSE HOLDER
3. MONO JACK
4. MONO XLR JACK
5. STEREO PIN JACK
6. REMOTE INPUT TERMINAL
7. DC INPUT TERMINAL
This is the AC INPUT for the AC INPUT CORD.
This fuse holder contains the AC fuse. If blown, replace it with same type fuse as
specified below. If the fuse continuously blows, refer servicing to qualified personnel.
VOLTAGE AC220V
FUSE RATING F0.5AL 250V
This jack is for connecting to the input jack of pre amplifier.
Do not use both the Mono XLR Jack and Stereo PIN Jack.
This jack is for connecting to the input jack of pre amplifier.
Do not use both the Mono Jack and Stereo PIN Jack.
This jack is for connecting to the input jack of pre amplifier.
Do not use both the Mono Jack and Mono XLR Jack.
This terminal is operated by remote control signal.
This is connected to DC 24V.
MODEL ECD-2602
ऀ࣮ࣿࣜ ࣰऒ
ࣜ
ࣜ
Summary of Contents for ECD-2602
Page 1: ...ECD 2602 Public Address 6 CD Changer OPERATINGMANUAL P A SYSTEM ...
Page 8: ...ࣜ ࣜ Connections 7 ...
Page 10: ...MEMO 9 ...