User Guide CC9-SAMBA •
CompactPCI®
Pentium M CPU Board
© EKF -14- ekf.com
K
B
/
M
S
C
O
M
U
S
B
CCA-
LAMBADA
A
U
D
I
O
IN
OUT
USB
PWR/RES
GP
IDE
E
T
H
D
V
I
CC9-
SAMBA
CCA-LAMBADA
(Mounting on top of CC9)
Expansion Module CCA-LAMBADA
Available as a companion board to the CC9-
SAMBA CPU card, the CCA-LAMBADA is
provided with common legacy I/O ports.
Interconnection between the CCA I/O module
and the CPU carrier board is achieved by the
expansion connector, which incorporates the
LPC (Low Pin Count), AC'97 (audio) and USB
interfaces.
As an option, the CCA-LAMBADA is available
with a rugged on-board 2.5-inch or 1.8-inch
hard disk drive.
The CCA-LAMBADA can be attached either left
or right (bottom or top) to the CPU board, and
is provided typically with a 4HP front panel.
In addition to its front panel I/O connectors, the
CCA-LAMBADA has been designed also for rear
I/O and therefore requires a non-bussed single-
slot P1/P2 backplane in addition to the
CompactPCI
bus. However, if front panel I/O is
solely needed, the J1/J2 connectors may be
omitted as an option.
For technical details please refer to the 'CCA-
LAMBADA Technical Information Manual',
available at www.ekf.de/c/ccpu/cca/cca_tie.pdf.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com