SC6-TANGO • CompactPC® Serial • Intel® Atom™ E39xx Processor (APL-I SoC)
P-EXP
I/F Type
Controller
LPC (Low Pin Count)
APL-I SoC
HD Audio
APL-I SoC
I2C
APL-I SoC (I2C Port 0)
2 x USB 2.0
APL-I SoC
UART Rx/Tx TTL
APL-I SoC (UART Port 0)
P-HSE
1)
I/F Type
Controller
SATA1
APL-I SoC (Port 1)
SATA2 (Option)
Option 88SE9170 SATA Controller (Port 0)
1)
No hardware RAID ist supported via P-HSE. Up to two SATA ports are available, both usable individually e.g. with the C48-M2 low
profile mezzanine module (dual M.2 SATA SSD). The legacy C47-MSATA mezzanine (mSATA SSD) however is wired differently,
allowing only the optional P-HSE SATA2 port to be used with the C47-MSATA host connector 1. Please use the C48-M2 as functional
replacement.
CompactPCI® Serial
System Slot Controller
The PICMG® CompactPCI® Serial specification defines a card slot system based on the high speed
data links PCI Express®, SATA, Ethernet and USB. The SC6-TANGO, designed to act as a
CompactPCI® Serial system slot controller, provides the resources of these interfaces. The
backplane distributes them in the form of point to point connections to the peripheral slots.
The SC6-TANGO provides most communication channels defined by CompactPCI® Serial on the
backplane:
<
Four PCIe Links x1, 2.5GT/s , 5GT/s
<
Four USB 2.0 Ports
<
Two Gigabit Ethernet ports
©
EKF
-
33
-
ekf.com
