SC6-TANGO • CompactPC® Serial • Intel® Atom™ E39xx Processor (APL-I SoC)
Ethernet Connectors RJ45
All Ethernet ports on the SC6-TANGO are based on individual I210IT PCIe to Ethernet controllers,
i.e. offer different MAC addresses, hence suitable for simple network attachment or flexible usage
as router or gateway. The IEEE 1588 PPS signal (refer to backplane) is derived from the NIC1 which
is wired to the upper RJ45 connector (Port 1).
Gigabit Ethernet Ports 1/2 (P-ETH, RJ-45)
Port 1
IEEE 1588
PPS
1
N
2
NC1_MDX0-
3
N
4
N
5
NC1_MDX2-
6
NC1_MDX1-
7
N
8
NC1_MDX3-
Port 2
1
N
2
NC2_MDX0-
3
N
4
N
5
NC2_MDX2-
6
NC2_MDX1-
7
N
8
NC2_MDX3-
The lower green LED of each front panel connector indicates LINK established when continuously
on, and data transfer (activity) when blinking. If the lower green LED is permanently off, no LINK
is established. The upper green/yellow dual-LED signals the link speed 1Gbit/s when lit yellow,
100Mbit/s when lit green, and 10Mbit/s when off.
©
EKF
-
58
-
ekf.com
