2
Mounting
The devices have degree of protection IP10, and are the
-
refore suitable for use in dry interior rooms. The 1 CH and
2 CH models are suitable for installation in wall-mounting
boxes. The plastic support allows mounting on a profile
rail according to EN 60715 inside electrical distribution
panels and cabinets.
Before removing the device, be sure that inputs, outputs,
and the DC power supply have been disconnected.
•
Safety class II
•
Weight 37 g
•
Dimensions (LxHxP): 53 x 61 x 29 mm
1) Control logic protection only
Protections
The device is equipped with the following protections:
•
OVP Over voltage protection
1
•
RVP Reverse polarity protection
1
•
OCP Open circuit protection
1
2
3
4a
EK-GD2-DL-1-LV
5
4b
2
1
3
EK-GD2-DL-2-LV
4a
4b
Nr.
Label
Connection
1
DC IN (+)
DC (+) input
DC IN (-)
DC (-) input
2
DA
DALI pole 1
DA
DALI pole 2
3
LED OUT x (+) Output x (+)
LED OUT x (-)
Output x (-)
4a
-
Status internal LED
4b
-
Feedback or DT6 / DT8 selector (**)
5 (*)
PUSH
N.O. pushbutton, pole 1
PUSH
N.O. pushbutton, pole 2
(*) EK-GD2-DL-1-LV only
(**) EK-GD2-DL-2-LV only
Accessory for 1 CH and 2 CH models
Rail-mounting support
The devices EK-GD2-DL-1-LV and EK-GD2-DL-2-LV
can be mounted on 35 mm rail (according to EN 60715)
with the plastic support included in the delivery.
Control, signaling and connection elements
The devices are equipped with screw terminals for con
-
necting the 12 / 48 Vdc input power supply (1), the output
loads (3) and the DALI bus (2). The EK-GD2-DL-1-LV
model is equipped with 2 poles for local control (5).
Both models have internal status LEDs (4a) and a
feedback button (4b) which, in the EK-GD2-DL-2-LV mo
-
del, also allows the selection of DALI DT6 / DT8 mode.
The meaning of the status LED for EK-GD2-DL-1-LV and
EK-GD2-DL-2-LV devices is as follows:
•
Green steady on: normal operation and DALI line pre
-
sent;
•
Green flashing: no DALI line;
•
Flashing red: generic output error.
The button (4b) for EK-GD2-DL-1-LV activates the
feedback function, while for EK-GD2-DL-2-LV it allows
the selection of DT6 (1 or 2 channels) or DT8 Tunable
White.
