6
Marks
•
CE: the device complies with the Electromagnetic
Compatibility Directive (2014/30/EU), the Low Volta
-
ge Directive (2014/35/EU) and the RoHS III Directive
(2011/65/EU).
•
Reference Standards: EN 61347-1:2015, EN 61347-
2-13, EN 55015:2013+A1:2015, EN 61547:2009, EN
50581:2012, IEC/EN 62386-101/102/207, IEC/EN
60929-E.2.1.
•
IEC/EN 62386-207 Digital addressable lighting interfa
-
ce, Particular requirements for control gear – LED mo
-
dules (device type 6).
•
IEC 60929-E.2.1 Control interface for controllable bal
-
lasts - control by DC voltage - functional specification
Dimensions
25
29
61
53
25
29
61
53
Disposal
At the end of its useful life the product
described in this datasheet is classified
as waste from electronic equipment in
accordance with the European Direc
-
tive 2012/19/EU (WEEE recast), and
cannot be disposed together with the
municipal undifferentiated solid waste.
Maintenance
The device is maintenance-free. To clean use a dry cloth.
It must be avoided the use of solvents or other aggressive
substances.
Warnings
•
Installation, electrical connection, configuration and
commissioning of the device can only be carried out by
qualified personnel in compliance with the applicable
technical standards and laws of the respective countri
-
es
•
Opening the housing of the device causes the imme
-
diate end of the warranty period
•
In case of tampering, the compliance with the essential
requirements of the applicable directives, for which the
device has been certified, is no longer guaranteed
•
ekinex
®
defective devices must be returned to the ma
-
nufacturer at the following address: Ekinex S.p.A. Via
Novara 35, I-28010 Vaprio d’Agogna (NO) Italy
Other information
•
The instruction sheet must be delivered to the end cu
-
stomer with the project documentation
•
For further information on the product, please contact
the ekinex
®
technical support at the e-mail address:
support@ekinex.com or visit the website www.ekinex.
com
•
Each ekinex
®
device has a unique serial number on
the label. The serial number can be used by installers
or system integrators for documentation purposes and
has to be added in each communication addressed to
the EKINEX technical support in case of malfunctioning
of the device
•
DALI, DALI2 and their logos are registered trademarks
of the Digital Illumination Interface Alliance (DiiA).
© EKINEX S.p.A. The company reserves the right to make changes to this
documentation without notice.
References
•
IEC/EN 62386-101 - Digital addressable lighting inter
-
face, General requirements - System
•
IEC/EN 62386-102 Digital addressable lighting interfa
-
ce, General requirements - Control gear
Warning!
Incorrect disposal of this product may
cause serious damage to the environment and hu-
man health. Please be informed about the correct
disposal procedures for waste collecting and pro-
cessing provided by local authorities.
!
