2
The device can be completed with a square ekinex
®
fra-
me of the Form (EK-FOQ -...) or Flank (EK-FLQ -...) se-
ries; the ‘NF (No Frame), Deep or Surface versions must
be mounted without a frame. Double mounting at 71 mm
center distance is also possible in combination with dou-
ble frames from the Form (EK-FO2 -...) or Flank (EK-FL2
-...) series.
• insert the metal support (d) on the adapter (c);
•
fix the adapter-support assembly (c + d) by means of
the pair of screws (e) on the wall-mounting box (a) with
suitable holes, possibly inserting the frame (b) for the
Form or Flank series;
• insert the voice assistant (f) into the support-adapter
assembly (c+d), connecting the 12-24 Vdc power sup-
ply to the terminal on the rear side of the device (see
the section: “Power supply connection”);
• screw the device onto the adapter-support assembly
(c+d), by using the supplied pair of screws (g);
•
snap-fit the plate (h).
Square single plate (*)
with 60 x 60 mm window
Code EK-SQS-... (Surface)
Code EK-DQS-... (Deep)
Code EK-PQS-... (FF)
(to be used with EK-VA2-WL-...)
Rectangular single plate (*)
with 60 x 60 mm window
Code EK-SRS-... (Surface)
Code EK-DRS-... (Deep)
Code EK-PRS-... (FF)
(to be used with EK-VA2-WL-...-R)
Double plate (*)
with two 60 x 60 mm windows
Code EK-S2S-... (Surface)
Code EK-D2S-... (Deep)
Code EK-P2S-... (FF)
(to be used with EK-VA2-WL-...)
Square form frame (*)
EK-FOQ-...
Square flank frame (*)
EK-FLQ-...
Double form frame (*)
EK-FO2...
Double flank frame (*)
EK-FL2-...
(*) To be completed with the extension for colour and finishing
Mounting
The device has degree of protection IP20, and is therefo-
re suitable for use in dry interior rooms. The installation of
the device can be done with round, square or rectangular
flush mounting box.
To mount the device, please carry out the following ope-
rations:
Note.
The plate, the adapter and the possible frame
for completing the device must be ordered sepa-
rately. For more information on available materials,
colours and finishes, see also the ekinex
®
product
catalog or browse www.ekinex.com.
i
Installation for round or square wall mounting box
a
b c
f
g
e
d
h
a) Wall mounting box
b) Frame for Form or Flank series only
c) Plastic adapter for square or rectangular plate (to be ordered
separately)
d) Metal support for wall mounting box
e) Screws (for metal support)
f) Voice assistant with cover
g) Screws (for device)
h) Square or rectangular plate for FF, Surface or Deep series (to
be ordered separately)
Installation for rectangular wall mounting box
a
b
c
f
g
h
e
d
