3
Configuration and commissioning
Configuration and commissioning of the device require
the use of the “Ekinex Tool” app, available for Android and
iOS systems and downloadable from the related digital
stores.
The activities to be performed are as follows:
• Download and install the “Ekinex Tool” app;
• At the start, follow the steps of the wizard to add a new
device (a), by pressing the virtual button “+”; by pres-
sing on “Eseguo” and “Next”, the configuration starts
(b);
Characteristics of the terminal block
•
Wire section: 28-16 AWG / 0.081-1.31 mm
2
(solid or
stranded)
• Torque: 0.2 Nm
• Recommended wire stripping 6-7 mm
• Screw size: M2.0
• Flammability rating: UL94-V0
Switching and display elements
The device is equipped with buttons for activating some
functions and RGB LEDs for the backlight.
Switching elements
• There are 4 backlit buttons for manual activation of the
voice assistant (1), for the ON/OFF setting of the mi-
crophone (2) and for adjusting the speaker volume (3).
Display elements
• RGB LEDs backlighting for each button and for the sta-
tus bar (4).
Warning! The electrical connection of the device
can be carried out only by qualified personnel.
The incorrect installation may result in electric
shock or fire. Before making the electrical con
-
nections, make sure the power supply has been
turned off.
!
Warning! In order to supply the device, only 12-
24 Vdc power suppliers only are allowed. The
use of other power supplies can compromise
the communication and damage the devices
connected to the bus.
!
Note.
The screws supplied in the package are su
-
itable for standard installations. For more specific
applications, where the screws have to be repla-
ce
d, only flat-head screws must be used.
i
1) Button for manual activation of the voice assistant
2) Mute (microphone ON/OFF) button
3)
Volume Up button
4) Volume Down button
5) 12-24 Vdc power supply input block
5
1
2
3
4
Power supply connection
The power supply is connected via the 2-way terminal in-
cluded in the device delivery. It has to to be wired and
inserted in the appropriate housing located on the back of
the device (5), respecting the indicated polarity.
+
- 12-24 Vdc
a
